Loading...
Thin film transistor circuits and systems /
Main Author: | |
---|---|
Other Authors: | |
Format: | Printed Book |
Subjects: |
Table of Contents:
- 1. Introduction
- Organic Light Emitting Displays
- Flat-Panel Biomedical Imagers
- Backplane Technologies
- Organization
- 2. Design Considerations
- Temporal and Spatial Non-Uniformity
- Compensation Schemes
- Current Driving Scheme
- Voltage Driving Scheme
- Design Considerations for AMOLED Displays
- Lifetime and Yield
- Differential Aging and Mura
- Power Consumption
- Aperture Ratio
- IR Drop and Ground Bouncing
- Implementation Cost
- Design Considerations for Flat Panel Imager
- Input referred Noise and Dynamic Range
- Implementation Cost
- 3. Hybrid Voltage-Current Programming
- Multi-Modal Biomedical Imaging Pixel Circuit
- Multi-Modal Biomedical Sensor Array
- Peripheral Circuitries
- Measurement Results
- Improved Dynamic Range
- Noise Analysis of CBVP Pixel Circuit
- CBVP AMOLED Pixel Circuit
- 4. Enhanced-Settling Current Programming
- Localized current source
- Current Feedback
- Positive Feedback
- Stability and Noise Analysis
- Measurement Results and Discussion
- Self-Calibration of the Current Source
- 5. Charge-Based Driving Scheme
- Advance Mobile Technology (AdMoTM)
- Measurement Results
- Implementation of the Relaxation Technique
- AMOLED Display
- Real-Time Biomedical Imaging Pixel Circuit
- Noise Analysis of Charge-Based Pixel Circuit
- 6. High Resolution Architectures
- Time Dependent Charge Injection and Clock Feed-Through
- Successive Calibration
- Arrays Structure and Timing
- Blanking-time extraction
- Simultaneous extraction
- Configurable Current Comparator
- Measurement Results and Discussions
- Hybrid approach
- 7. Summary and Outlook
- Appendix A. Enhanced Voltage Driving Schemes
- Interleaved Addressing Scheme
- 3-TFT Pixel Circuit
- Appendix B. OLED Electrical Calibration
- Interdependence Between Electrical and Luminance Degradation
- Electrical Compensation of OLED Degradation
- Compensating for different stress levels